Power Supply Cable Guide: What You Should Know

Do you know what the most frustrating part of building a PC is? No, it’s not figuring out which components are compatible with each other. It’s not even finding the right drivers for your new hardware. It’s connecting the power supply cables! There are so many different cables, and they all seem to be different sizes and shapes. But don’t worry, we’re here to help. Just follow our power supply cable guide and you’ll have your power supply cable connected in no time!

Power Supply Cable Guide

Power Supply Cable Guide

Here I am going to discuss everything you need to know about power supply cables, like how to connect power supply cables, the dangers of power supply cables, safety instructions, etc.

How to Connect Your Power Supply Cable

  1. Start by finding the right power supply for your needs. If you’re not sure, just ask one of our friendly sales associates and they’ll be happy to help you out.
  2. Once you’ve got the right power supply, it’s time to start connecting the cables. The first thing you’ll need to do is connect the 24-pin ATX cable to the motherboard. This is usually located near the edge of the board, and it should be labeled “ATX 24.” If you can’t find it, consult your motherboard’s manual.
  3. Next, you’ll need to connect the 4+4 pin CPU power cable to the socket on the motherboard labeled “CPU_PWR.” Again, if you can’t find it, consult your motherboard’s manual.
  4. Finally, connect the PCIe power cables to any graphics cards that you may have installed. These are usually located at the top of the card, and they should be labeled “PCIe.” That’s it! Now all you need to do is plug in your power supply and flip the switch on the back. Congratulations, you’ve successfully connected your power supply cable!

How do I know what power supply cables I need?

Do you need a new and good power supply for your computer? Not sure which cables to get? Here’s a quick guide to help you figure out which power supply cables you need.

The first thing you’ll need to do is determine the wattage of your power supply. This information can usually be found on the side or back of the power supply unit (PSU). Once you have the wattage, you can determine the power supply’s amperage and voltage.

The amperage is the current that the power supply can provide. The voltage is the force with which the wind is pushed through the power supply. In general, the higher the voltage, the higher the amperage.

Now that you know your power supply’s wattage, amperage, and voltage, you can determine which cables you need.

The most common power supply cables are:

  • The 24-pin ATX power cable.
  • The 4+4 pin CPU power cable.
  • The 8-pin EPS power cable.
  • The 6+2 pin PCI Express power cable.

The 24-pin ATX power cable is the most common power cable used. And it is used to link the power supply to the motherboard. This cable has 24 pins arranged in two rows of 12.

The 4+4 pin CPU power cable connects the power supply to the CPU. This cable has eight pins arranged in two rows of four.

The 8-pin EPS power cable connects the power supply to the EPS (CPU power) connector on the motherboard. This cable has eight pins arranged in two rows of four.

The 6+2 pin PCI Express power cable connects the power supply to the PCI Express slot on the motherboard. This cable has six pins arranged in two rows of three and two pins arranged in a row of two.

Once you know which power supply cables you need, you can purchase them from your local computer store or online.

Power Supply Cable Connector Names and Functions

  • 24-pin ATX Main Power Cable – This cable provides power to the motherboard and all its components. It is usually the thickest cable in the power supply unit (PSU).
  • 4+4-pin EPS/ATX12V Power Cable – This cable provides power to the CPU. It is usually a thinner cable than the 24-pin ATX power cable.
  • 6+2-pin PCIe Power Cable – This cable provides power to PCI Express (PCIe) devices, such as graphics cards. It is usually a thin and flexible cable.
  • SATA Power Cable – This cable provides power to SATA devices, such as hard drives and optical drives. It is usually a thin and flexible cable.
  • 4-pin Molex Power Cable – This cable provides power to older devices that use the 4-pin Molex connector. It is usually a thicker and less flexible cable.

Now that you know the different types of power supply cables, let’s move on to connecting them…

1. 24-pin ATX Main Power Cable

The 24-pin ATX main power cable is the most important cable in the PSU. It provides power to the motherboard and all its components. To connect it, simply align the connector with the header on the motherboard and push it in until it clicks into place.

2. 4+4-pin EPS/ATX12V Power Cable

The 4+4-pin EPS/ATX12V power cable is used to provide power to the CPU. To connect it, simply align the connector with the header on the motherboard and push it in until it clicks into place.

3. 6+2-pin PCIe Power Cable

The 6+2-pin PCIe power cable is used to provide power to PCI Express (PCIe) devices, such as graphics cards. To connect it, simply align the connector with the header on the device and push it in until it clicks into place.

4. SATA Power Cable

The SATA power cable is used to provide power to SATA devices, such as hard drives and optical drives. To connect it, simply align the connector with the header on the device and push it in until it clicks into place.

5. 4-pin Molex Power Cable

The 4-pin Molex power cable is used to provide power to older devices that use the 4-pin Molex connector. To connect it, simply align the connector with the header on the device and push it in until it clicks into place.

Once all the cables are connected, you can close up the case and turn on your computer. If everything goes well, it should boot up without any problems. If you have any questions, please feel free to leave a comment below and I’ll try to help you out.

What are the different power supply cables?

We all know that computers need a power supply to function. But many people don’t know that there are different types of power supply cables, each with a specific purpose. This blog post will look at the different kinds of power supply cables and what they’re used for.

The most common type of power supply cable is the AC power cord. AC power cords are used to connect a computer to an AC outlet. They typically have two prongs that plug into the wall outlet, and a third prong plugs into the computer.

Another type of power supply cable is the DC power cord. DC power cords connect a computer to a DC power source, such as a battery. They typically have a single prong that plugs into the computer and a second prong that plugs into the power source.

The third type of power supply cable is the USB power cord. USB power cords are used to connect a computer to a USB port. They typically have a single prong that plugs into the computer and a second prong that plugs into the USB port.

Finally, there is the optical power cord. Optical power cords are used to connect a computer to an optical drive. They typically have a single prong that plugs into the computer and a second prong that plugs into the optical drive.

So, there you have it! These are the four most common types of power supply cables. Each has its specific purpose, so be sure to choose the good one for your needs.

Are Modular Power Supply Cables Universal

No, modular power supply cables are not universal. They are different in structure and in power ratings. By using a modular power supply cable you will destroy your computer components.

Can You Mix Power Supply Cables

No, you should not do this. This will destroy your hard drives. Since different power supply cables have a different amounts of power flowing from them. When you will mix them it will cause a fatal power failure. It will not only kill your hard drives it is also dangerous for your motherboard and power cord of your computer.

Can You Use Different Power Supply Cables

Yes, you can but only if you want to change the appearance of your computer setup. You can use the power supply of different colors, connector combinations, materials, etc but the origin of the power supply cable should be the same. It cannot be changed if you change it then your computer is in a great risk.

How To Connect SATA Power Cable To Power Supply

Connecting SATA hard disk drive to the power supply is pretty simple. Just you need to follow my instructions given below.

  • First, connect the figure out the right power cable for your SATA drive. SATA power cables look like an “L” shape. Figure out it.
  • SATA power cable should have 4 or 5 wires in it. And its connector should consist of 15 pins. 1 pin will be located at the right angle at one end of the connector.
  • You can also identify it by looking at your SATA drive power connector. The power supply cable should be similar to it.
  • After finding out right cable now insert this cable into the SATA drive power connector.
  • If the the power supply cable connects to the SATA drive in the right way then you have successfully connected the SATA power cable to the power supply.

Conclusion

Connecting a power supply cable may seem like a daunting task, but it’s really not that difficult once you know what you’re doing. Just follow these four easy steps and you’ll have it done in no time! If you’re still having trouble, our friendly sales associates are always happy to help out. And don’t forget to check your motherboard’s manual if you can’t find something; it’s usually a big help. Good luck!

Leave a Reply

Your email address will not be published. Required fields are marked *